On the thermal conductivity of bimodal SiC/A356 composites fabricated via powder metallurgy route

The present study investigates the thermal conductivity of bimodal SiC particulate distribution in aluminum matrix composites fabricated via powder metallurgy route. The effects of the SiC_p reinforcement size distribution and processing parameters such as sintering time and temperature on the thermal conductivity have been examined. The Box–Behnken experimental array was employed to identify the effects of selected variables on the thermal conductivity of the composite. A reasonable augmentation in the thermal conductivity was observed with an increase in sintering time and %volume fraction of fine SiC particulates. It has been demonstrated that the matrix doped with fine SiC particulates (37?µm) occupied interstitial positions and formed continuous SiC–matrix network resulting in minimizing the micropores that contributed for good thermal conductivity, that is, 235?W/mK. Scanning electron microscopy (SEM) and x-ray diffraction (XRD) were conducted to evaluate the microstructure architecture and interfacial phase formation.     

P91钢管道异常低硬度部位的组织和性能

对电厂运行过程中发现的P91钢主蒸汽管道的低硬度部位进行了微观组织观察、短时力学性能试验和高温持久强度试验,分析了其硬度偏低的原因。结果表明,低硬度区域P91钢组织为铁素体+析出物,位错密度较低,M₂₃C₆相在晶界处粗化聚集,同时析出新相Laves相,使得P91钢的短时力学性能和高温持久强度下降严重。     

热处理对挤压态Mg-6Gd-5Y-1Zn合金组织与性能的影响

通过对Mg-6Gd-5Y-1Zn(质量分数,%)合金在固溶和时效处理状态下显微组织和力学性能的研究发现,α-Mg基体、沿挤压方向分布的条状18R-LPSO相、少量的Mg₂₄(GdYZn)₅ 相以及细层片状的14H-LPSO相构成了挤压态合金的组成相。挤压态合金经固溶(T4)处理后,一部分18R-LPSO相溶入基体,并且基体中的14H-LPSO相伸长同时粗化。挤压态合金经过固溶加时效(T6)处理后,大量β′相从α-Mg基体中析出。T6态合金的室温力学性能最好,其屈服强度、抗拉强度及伸长率分别为272 MPa、406 MPa和6.1%。β′相沉淀也发生在挤压态合金的直接人工时效(T5)处理过程,但相比于T6处理,14H-LPSO相和β′相在基体中的体积分数均偏低。     

超高强7055铝合金铸锭均匀化工艺优化

采用光学显微镜、扫描电镜、差热分析及透射电镜等手段,对一种航空用超高强7055铝合金大尺寸铸锭的均匀化工艺进行分析与优化。提出分级提高均匀化温度的方法,在确保不发生过烧的情况下,最大限度改善铸锭质量。结果显示:低温预均匀化时,铸锭中析出大量的Al₃Zr相,能够大幅度降低对后续挤压变形的再结晶比例;对铸锭采用400 ℃×4 h+465 ℃×16 h+474 ℃×8 h的分级均匀化处理工艺,能够显著消除铸锭中低熔点相的含量,提高铸锭质量,同时相比于原工艺节省约13 h。新的均匀化处理工艺,不仅提高了生产效率,还能够为后续工艺提供良好的铸锭。     

三液相酶催化体系水解橄榄油的研究

采用三液相酶催化体系水解橄榄油,考察构成三液相体系的物质对酶的影响;考察了硫酸铵的含量和PEG400的含量对酶的分配分数、回收率及催化效率的影响,研究了中下相与油的体积比对水解橄榄油的影响,并初步探究了三液相体系水解橄榄油的微观液滴结构。结果表明:在酶添加量142.5 U/g、硫酸铵含量15%、PEG400含量28%、中下相与油的体积比3∶1、转速200 r/min条件下,酶的分配系数达到28.28,酶的回收率达99.65%,水解24 h后,脂肪酸含量达98.17%,在对照(油水体系)中,相同条件下产生的脂肪酸含量仅为42.06%。显微镜下液滴观察结果表明,三液相体系中独特的液滴结构可能是该体系优于油水两相体系的原因。     

Analysis and optimisation of particle mixing performance in fluid phase resonance mixers based on Euler/Lagrange calculations

A novel mixing principle utilising oscillating liquid columns was analysed numerically with regard to particle dispersion characteristics. For producing fluid oscillations a pipe (diameter 100 mm) was immersed centrally into a vessel (diameter 450 mm) filled with liquid (filling height 700 mm) and periodically pressurised (frequency 1.2 Hz). The outlet geometry of the central pipe, just ending near the vessel bottom, has a strong effect on mixing and was optimised in this study. The principle of a FPR-mixer does not require rotating stirrers and in the turbulent regime it has power numbers comparable to propellers. The numerical calculations were conducted by a Euler/Lagrange approach neglecting two-way coupling as well as inter-particle collisions for clarity in order to only focus on the effect of interfacial forces on particle dispersion. The continuous phase was calculated in an unsteady way based on the Reynolds-averaged equations combined with the k-ω-SST (shear stress transport) turbulence model. Lagrangian tracking was conducted considering all relevant forces; drag, gravity/buoyancy, fluid inertia, added mass, Basset force and transverse lift forces due to shear and particle rotation. The importance of these forces was analysed with respect to the turbulent particle Stokes number (considered range 0.004 < St < 10.0) and particle/liquid density ratio (i.e. 1.05, 1.5 and 2.5). Finally, the significance of Basset force and shear-rotation lift force (i.e. Magnus effect) on the dispersion process was quantified by mixing parameters.     

基于梯度分布调节策略的Xgboost算法优化

为了解决集成学习模型Xgboost在二分类问题中少数类检出率低的问题，提出了基于梯度分布调节策略的改进的Xgboost算法——LCGHA-Xgboost。首先，通过定义损失贡献（LC）来模拟Xgboost算法中样本个体的损失量；而后，通过定义损失贡献密度（LCD）来衡量Xgboost算法中样本被正确分类的难易程度；最后，提出了梯度分布调节算法LCGHA，依据LCD动态调整样本个体的一阶梯度分布，间接地增大难分样本（主要存在于少数类中）的损失量，减小易分样本（主要存在于多数类中）的损失量，使Xgboost算法偏向对难分样本的学习。实验结果表明,与Xgboost、GBDT、随机森林（Random_Forest）这三大集成学习算法相比，LCGHA-Xgboost算法在多个UCI数据集上的召回率（Recall）值有5.4%~16.7%的提高，AUC值有0.94%~7.41%的提高；在垃圾网页数据集WebSpam-UK2007和DC2010数据集上所提算法的Recall值更是有44.4%~383.3%的提高，AUC值有5.8%~35.6%的提高。LCGHA-Xgboost算法可以有效提高对少数类的分类检出能力，减小少数类的分类错误率。     

[可靠性建模及试验技术]重型机床液压元件油液污染退化量分布剖面可靠性建模

针对重型机床液压系统故障频繁且多与油液中的固态颗粒污染物相关的问题，进行了油液污染趋势变化试验。通过时域分析获得了油样颗粒数的有量纲和量纲一参数，通过Q-Q图和K-S检验分析有量纲参数，污染颗粒数是退化量服从正态分布的退化数据。进行了油液污染与环境相关性分析试验，采用相关系数法分析得到，颗粒数变化量与一定范围内的温度、流量、压力的相关性小；将液压元件分为管路、阀、过滤器三类，用直径5 μm左右的颗粒和直径大于15 μm的颗粒分别研究管路及阀件的堵塞和磨损情况，以过滤器过滤精度大小的颗粒研究过滤器的堵塞情况，设定ISO4406标准20/17级对应的颗粒数为阈值，利用退化量分布建立了液压元件单一故障模式的可靠性模型；利用竞争失效模型将上述模型融合为多故障模式下的可靠性模型。     

一种波长调制干涉仪光强实时反馈控制系统

提出了一种实时反馈控制系统,保证波长调制干涉仪的激光光强在波长调谐过程中的稳定性,以减小波长调制干涉仪因激光光强的波动产生的相位误差。该控制系统由光电探测器、数据采集卡、光电调幅器和控制软件等组成。实验结果表明,该系统的响应速度超过了干涉仪获取干涉图的速度,不仅能够稳定输出理想的光强值,而且还提高了干涉仪的测量精度。     

Structure variation and energy storage properties of acceptor-modified PBLZST antiferroelectric ceramics

Energy storage capacitors with high recoverable energy density and efficiency are greatly desired in pulse power system. In this study, the energy density and efficiency were enhanced in Mn-modified (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃ antiferroelectric ceramics via a conventional solid-state reaction process. The improvement was attributed to the change in the antiferroelectric-to-ferroelectric phase transition electric field (E_F) and the ferroelectric-to-antiferroelectric phase transition electric field (E_A) with a small Mn addition. Mn ions as acceptors, which gave rise to the structure variation, significantly influenced the microstructures, dielectric properties and energy storage performance of the antiferroelectric ceramics. A maximum recoverable energy density of 2.64 J/cm³ with an efficiency of 73% was achieved when x = 0.005, which was 40% higher than that (1.84 J/cm³, 68%) of the pure ceramic counterparts. The results demonstrate that the acceptor modification is an effective way to improve the energy storage density and efficiency of antiferroelectric ceramics by inducing a structure variation and the (Pb_0.93Ba_0.04La_0.02)(Zr_0.65Sn_0.3Ti_0.05)O₃-xMn₂O₃ antiferroelectric ceramics are a promising energy storage material with high-power density.